Uses of Class
com.sun.spot.peripheral.PIOPin

Packages that use PIOPin

com.sun.spot.peripheral

Access to the hardware peripherals built in to the Sun SPOT main board.

Uses of PIOPin in com.sun.spot.peripheral

Methods in com.sun.spot.peripheral that return PIOPin

PIOPin	ISpotPins.getAttentionPin() The pin used by the power control PowerController to signal to the 9200
PIOPin	ISpotPins.getBD_REV0() The low-order bit of the hardware rev
PIOPin	ISpotPins.getBD_REV1() The mid-order bit of the hardware rev
PIOPin	ISpotPins.getBD_REV2() The high-order bit of the hardware rev
PIOPin	ISpotPins.getCC2420_CCA_Pin() The Channel Clear pin of the CC2420
PIOPin	ISpotPins.getCC2420_FIFO_Pin() The FIFO empty pin of the CC2420
PIOPin	ISpotPins.getCC2420_FIFOP_Pin() The FIFO threshold reached pin of the CC2420
PIOPin	ISpotPins.getCC2420_RESET_Pin() The reset pin of the CC2420
PIOPin	ISpotPins.getCC2420_SFD_Pin() The Start of Frame Delimiter pin of the CC2420
PIOPin	ISpotPins.getCC2420_VREG_EN_Pin() The voltage regulator enable pin of the CC2420
PIOPin	ISpotPins.getLocalGreenLEDPin() Return the pin controlling the green LED on the Spot board.
PIOPin	ISpotPins.getLocalRedLEDPin() Return the pin controlling the red LED on the Spot board.
PIOPin	ISpotPins.getSPI_CLK_Pin() Returns the SPI CLK (clock) pin.
PIOPin	ISpotPins.getSPI_MISO_Pin() Returns the SPI MISO (master in/slave out) pin.
PIOPin	ISpotPins.getSPI_MOSI_Pin() Returns the SPI MOSI (master out/slave in) pin.
PIOPin	ISpotPins.getTC_TCLK(int tcNum) The clock input pin for a timer-counter
PIOPin	ISpotPins.getTC_TIOA(int tcNum) The A pin for a timer-counter
PIOPin	ISpotPins.getTC_TIOB(int tcNum) The B pin for a timer-counter
PIOPin	ISpotPins.getUSB_EN() The pin used to select USB "suspend" mode in the LTC3455
PIOPin	ISpotPins.getUSB_HP() The pin used to select USB high power mode of the LTC3455
PIOPin	ISpotPins.getUSB_PWR_MON() The pin used to monitor power on the USB connector

Methods in com.sun.spot.peripheral with parameters of type PIOPin

int

ISpiMaster.sendReceive8PlusVariableReceiveN(SpiPcs pcs, int first, byte[] subsequent, PIOPin fifo_pin) Specialised SPI send of 8 bits, simultaneous receive of 8 bits, then receive of multiple 8 bits This routine is highly specialised for the CC2420 the number of bytes received is determined by the 7 bit value read as the first byte after the initial 8 bits