com.sun.spot.peripheral.radio
Interface I802_15_4_PHY

public interface I802_15_4_PHY

Defines the portion of the I802.15.4 PHY layer specification that this library currently supports. Note: even if you intend to use this class to implement a physical-level transmitter only, you should still call pdDataIndication in a separate thread in order to prevent the CC2420's RX FIFO from filling with radio noise.

See Also:

http://standards.ieee.org/getieee802/index.html

Field Summary

static int	BUSY Return code for CCA requests when channel is not clear
static int	IDLE Return code for CCA requests when channel is clear
static int	PHY_CURRENT_CHANNEL Attribute to set the current channel (in the range 11..26) (see plmeSet(int, int))
static int	PHY_TRANSMIT_POWER Attribute to set the transmit power (the parameter must be a six bit 2s-complement number in the range -32..31 - the easiest was to get this is to pass in "myPower & 0x3F") (see plmeSet(int, int))
static int	RX_ON Value for TRX state (see plmeSetTrxState(int)) to enable RX
static int	SUCCESS Return code for success in pdDataRequest(RadioPacket) and plmeSetTrxState(int)
static int	TRX_OFF Value for TRX state (see plmeSetTrxState(int)) to disable RX
static int	TX_ON Return code for plmeCCARequest() if transmission is active

Method Summary

void	pdDataIndication(RadioPacket rp) Receive a packet.
int	pdDataRequest(RadioPacket rp) Send a packet
int	plmeCCARequest() Check to see if channel is clear
int	plmeGet(int attribute) Gets the value of a PHY attribute
void	plmeSet(int attribute, int value) Sets the value of a PHY attribute.
int	plmeSetTrxState(int newState) Set the TRX state.

Field Detail

BUSY

static final int BUSY

Return code for CCA requests when channel is not clear

See Also:

Constant Field Values

IDLE

static final int IDLE

Return code for CCA requests when channel is clear

See Also:

Constant Field Values

RX_ON

static final int RX_ON

Value for TRX state (see plmeSetTrxState(int)) to enable RX

See Also:

Constant Field Values

SUCCESS

static final int SUCCESS

Return code for success in pdDataRequest(RadioPacket) and plmeSetTrxState(int)

See Also:

Constant Field Values

TRX_OFF

static final int TRX_OFF

Value for TRX state (see plmeSetTrxState(int)) to disable RX

See Also:

Constant Field Values

TX_ON

static final int TX_ON

Return code for plmeCCARequest() if transmission is active

See Also:

Constant Field Values

PHY_CURRENT_CHANNEL

static final int PHY_CURRENT_CHANNEL

Attribute to set the current channel (in the range 11..26) (see plmeSet(int, int))

See Also:

Constant Field Values

PHY_TRANSMIT_POWER

static final int PHY_TRANSMIT_POWER

Attribute to set the transmit power (the parameter must be a six bit 2s-complement number in the range -32..31 - the easiest was to get this is to pass in "myPower & 0x3F") (see plmeSet(int, int))

See Also:

Constant Field Values

Method Detail

pdDataRequest

int pdDataRequest(RadioPacket rp)

Send a packet

Parameters:

rp - - Packet to send

Returns:

SUCCESS | RX_ON

pdDataIndication

void pdDataIndication(RadioPacket rp)

Receive a packet. Note: this method is not synchronized because we assume only one thread will call this at a time.

Parameters:

rp - - Packet to fill in with data

plmeCCARequest

int plmeCCARequest()

Check to see if channel is clear

Returns:

TRX_OFF | BUSY | IDLE

plmeSet

void plmeSet(int attribute,
             int value)
             throws PHY_UnsupportedAttributeException,
                    PHY_InvalidParameterException

Sets the value of a PHY attribute.

Parameters:

attribute - - key of attribute to set

value - - value to set

Throws:

PHY_UnsupportedAttributeException

PHY_InvalidParameterException

See Also:

PHY_CURRENT_CHANNEL, PHY_TRANSMIT_POWER

plmeGet

int plmeGet(int attribute)
            throws PHY_UnsupportedAttributeException

Gets the value of a PHY attribute

Parameters:

attribute - - key of attribute to get

Returns:

- attribute value

Throws:

PHY_UnsupportedAttributeException

See Also:

PHY_CURRENT_CHANNEL, PHY_TRANSMIT_POWER

plmeSetTrxState

int plmeSetTrxState(int newState)

Set the TRX state.

Currently not implemented for TX_ON in the CC2420.

Parameters:

newState - -- TRX_OFF | RX_ON | TX_ON