com.sun.spot.peripheral.radio
Interface ILowPan

All Known Implementing Classes:

LowPan

public interface ILowPan

Interface that specifies the minimum functionality offered by a layer that implements the LowPan specification

Version:

0.1

Author:

Allen Ajit George

Field Summary

static byte	DEFAULT_HOPS default number of hops a routed packet should make
static byte	MAC_PAYLOAD_OFFSET Minimum length of the LowPan header
static byte	MAX_MAC_PAYLOAD_OFFSET normal length of a MESHED LowPan Packet, not counting broadcast or fragmentation

Method Summary

void	deregisterDataEventListener(IDataEventListener listener) Deregisters an application etc. that is called back when data is forwarded
void	deregisterProtocol(byte protocolNum) Deregisters the protocol manager that handles the specifies protocol manager
void	deregisterProtocolFamily(byte protocolFamily) Deregisters the protocol manager that handles the specifies protocol manager
IRoutingManager	getRoutingManager() Get the routing manager
void	receive(RadioPacket packet) Method called by INewpacketDispatcher when a packet is received
void	registerDataEventListener(IDataEventListener listener) Registers an application etc. that is notified when this node is used to forward a data packet
void	registerMHEventListener(IMHEventListener listener) Registers an application etc. that is notified when this node initiates/receives supported route events
void	registerProtocol(byte protocolNum, IProtocolManager protocolMan) Register protocol managers that send/receive data encoded using the specified protocol number, within the specified family.
void	registerProtocolFamily(byte protocolFamily, IProtocolManager protocolMan) Register protocol managers that send/receive data encoded for all protocols in a given family.
void	registerRouteEventListener(IRouteEventListener listener) Registers an application etc. that is notified when this node initiates/receives supported route events
long	send(byte protocolFamily, byte protocolNum, long toAddress, byte[] payload, int startOffset, int endOffset) Send a byte buffer on a given protocol.
boolean	send(byte protocolFamily, byte protocolNum, long toAddress, byte[] payload, int startOffset, int endOffset, boolean failIfNotSingleHop) Send a byte buffer on a given protocol.
long	sendBroadcast(byte protocolNum, byte[] buffer, int startOffset, int endOffset, int hops) Broadcast a byte buffer on a given protocol, without any attempt at meshing (can be fragmented)
void	sendWithoutMeshingOrFragmentation(byte protocolNum, long toAddress, byte[] buffer, int startOffset, int endOffset) Send a byte buffer on a given protocol, without any attempt at meshing or fragmentation
void	setOurAddress(long addr) Method called by RadioPacketDispatcher on a host.
IRoutingManager	setRoutingManager(IRoutingManager newRoutingManager) Replace the routing manager with a different implemenation

Field Detail

MAC_PAYLOAD_OFFSET

static final byte MAC_PAYLOAD_OFFSET

Minimum length of the LowPan header

See Also:

Constant Field Values

DEFAULT_HOPS

static final byte DEFAULT_HOPS

default number of hops a routed packet should make

See Also:

Constant Field Values

MAX_MAC_PAYLOAD_OFFSET

static final byte MAX_MAC_PAYLOAD_OFFSET

normal length of a MESHED LowPan Packet, not counting broadcast or fragmentation

See Also:

Constant Field Values

Method Detail

registerProtocolFamily

void registerProtocolFamily(byte protocolFamily,
                            IProtocolManager protocolMan)

Register protocol managers that send/receive data encoded for all protocols in a given family. Protocol Family numbers map to 6lowpan protocol dispatch numbers

Parameters:

protocolFamily - mily to which this protocol belongs. This should map to a 6lowpan protocol dispatch such as IPv6, etc.

protocolMan - protocol manager that will handle messages encoded using this protocol number

registerProtocol

void registerProtocol(byte protocolNum,
                      IProtocolManager protocolMan)

Register protocol managers that send/receive data encoded using the specified protocol number, within the specified family.

Parameters:

protocolNum - unique number to identify the protocol (0...255).

protocolMan - protocol manager that will handle messages encoded using this protocol number

deregisterProtocolFamily

void deregisterProtocolFamily(byte protocolFamily)

Deregisters the protocol manager that handles the specifies protocol manager

Parameters:

protocolFamily - family to which this protocol belongs. This should map to a 6lowpan protocol dispatch such as IPv6, etc.

deregisterProtocol

void deregisterProtocol(byte protocolNum)

Deregisters the protocol manager that handles the specifies protocol manager

Parameters:

protocolNum - unique number to identify the protocol (0...255).

registerDataEventListener

void registerDataEventListener(IDataEventListener listener)

Registers an application etc. that is notified when this node is used to forward a data packet

Parameters:

listener - object that is notified when data is forwarded

registerRouteEventListener

void registerRouteEventListener(IRouteEventListener listener)

Registers an application etc. that is notified when this node initiates/receives supported route events

Parameters:

listener - object that is notified when route events occur

registerMHEventListener

void registerMHEventListener(IMHEventListener listener)

Registers an application etc. that is notified when this node initiates/receives supported route events

Parameters:

listener - object that is notified when route events occur

deregisterDataEventListener

void deregisterDataEventListener(IDataEventListener listener)

Deregisters an application etc. that is called back when data is forwarded

Parameters:

listener - object that is notified when data is forwarded

send

boolean send(byte protocolFamily,
             byte protocolNum,
             long toAddress,
             byte[] payload,
             int startOffset,
             int endOffset,
             boolean failIfNotSingleHop)
             throws ChannelBusyException,
                    NoRouteException

Send a byte buffer on a given protocol. The caller simply supplied a byte payload

Parameters:

protocolFamily - the protocol family associated with the outgoing packet

protocolNum - the protocol number associated with the outgoing packet

toAddress - the destination

payload - byte array that holds the data to be sent

startOffset - offset within the byte array at which data should be read

endOffset - offset within the byte array after which data should not be read

failIfNotSingleHop - if true this method should not send if not single hop.

Returns:

true if the buffer was sent

Throws:

ChannelBusyException - the radio channel could not be accessed

NoRouteException - a route to the destination could not be found

send

long send(byte protocolFamily,
          byte protocolNum,
          long toAddress,
          byte[] payload,
          int startOffset,
          int endOffset)
          throws ChannelBusyException,
                 NoRouteException

Send a byte buffer on a given protocol. The caller simply supplied a byte payload

Parameters:

protocolFamily - the protocol family associated with the outgoing packet

protocolNum - the protocol number associated with the outgoing packet

toAddress - the destination

payload - byte array that holds the data to be sent

startOffset - offset within the byte array at which data should be read

endOffset - offset within the byte array after which data should not be read

Returns:

the time at which the data was sent

Throws:

ChannelBusyException - the radio channel could not be accessed

NoRouteException - a route to the destination could not be found

sendWithoutMeshingOrFragmentation

void sendWithoutMeshingOrFragmentation(byte protocolNum,
                                       long toAddress,
                                       byte[] buffer,
                                       int startOffset,
                                       int endOffset)
                                       throws NoAckException,
                                              ChannelBusyException

Send a byte buffer on a given protocol, without any attempt at meshing or fragmentation

Parameters:

protocolNum - higher level protocol number (for port based protocol manager)

toAddress - address of the remote device for radio packet

buffer - data buffer to be sent

startOffset - index of first byte of data to be sent from the buffer

endOffset - index of the last byte of data to be sent

Throws:

NoAckException - Ack was expected but not received

ChannelBusyException - radio channel was busy when send was attempted

sendBroadcast

long sendBroadcast(byte protocolNum,
                   byte[] buffer,
                   int startOffset,
                   int endOffset,
                   int hops)
                   throws ChannelBusyException

Broadcast a byte buffer on a given protocol, without any attempt at meshing (can be fragmented)

Parameters:

protocolNum - higher level protocol number (for port based protocol manager)

buffer - data buffer to be sent

startOffset - index of first byte of data to be sent from the buffer

endOffset - index of the last byte of data to be sent

hops - number of mesh hops this broadcast should take

Returns:

the time at which the data was sent

Throws:

ChannelBusyException - radio channel was busy when send attempted

receive

void receive(RadioPacket packet)
             throws ChannelBusyException,
                    NoRouteException

Method called by INewpacketDispatcher when a packet is received

Parameters:

packet - packet received over the radio

Throws:

ChannelBusyException - channel was busy when access was attempted

NoRouteException - No route could be found to the destination

setOurAddress

void setOurAddress(long addr)

Method called by RadioPacketDispatcher on a host. The low pan needs to use the basestations ieee address.

Parameters:

addr - 64-bit value representing our IEEE address

getRoutingManager

IRoutingManager getRoutingManager()

Get the routing manager

Returns:

the routing manager

setRoutingManager

IRoutingManager setRoutingManager(IRoutingManager newRoutingManager)

Replace the routing manager with a different implemenation

Parameters:

newRoutingManager - a new routing manager

Returns:

the old routing manager